Power On/Power Off - Bosch VIDEOJET multi 4000 Installation Manual

20 en | Connection
5.6

Power on/power off

Depending on the ordered product package, the unit is delivered together with a power cord.
Notice!
Use only a suitable power cord. Where necessary, use suitable facilities to ensure that the
power supply is free of interference such as voltage surges, spikes or brownouts. Connect the
unit to an earthed mains socket-outlet.
Do not connect the unit to the power supply until all other connections have been made.
1.
2.
Provided the network connection has been correctly made, the LINK LED also lights up. The
flashing LED ACTIVITY signals traffic on the network.
See also
–
2014.02 | V1 | F.01U.298.750
Make sure to use a suitable power cord and connect it to the unit.
Plug the power cord into the mains. The unit is ready for use as soon as the CONNECT
LED lights up.
LEDs, page 24
Installation Manual
VIDEOJET multi 4000
Bosch Sicherheitssysteme GmbH