Advanced Mode: Encryption; Advanced Mode: Maintenance - Bosch VJT-X20XF-E Installation And Operating Manual

VideoJet XF E
If either of these ranges are set, no IPv6 addresses are allowed to actively connect to the
device. The device itself may initiate a connection (for example, to send an alarm) outside the
defined ranges if it is configured to do so.
5.46

Advanced Mode: Encryption

A special license, with which you will receive a corresponding activation key, is required to
encrypt user data. You can enter the activation key to release the function on the Licenses
page.
Further topics:
–
5.47

Advanced Mode: Maintenance

Firmware
The VideoJet XF E is designed in such a way that its functions and parameters can be updated
with firmware. To do this, transfer the current firmware package to the unit via the selected
network. It will then be automatically installed there.
In this way, a VideoJet XF E can be serviced and updated remotely without a technician having
to change the installation on site.
You obtain the current firmware from your customer service or from the download area at
www.boschsecurity.com.
CAUTION!
Before launching the firmware upload make sure that you have selected the correct upload
file. Uploading the wrong files can result in the unit no longer being addressable, in which
case you must replace the unit.
You should never interrupt the installation of firmware. An interruption can lead to the flash-
EPROM being incorrectly programmed. This in turn can result in the unit no longer being
addressable, in which case it will have to be replaced. Even changing to another page or
closing the browser window leads to an interruption.
1.
2.
Bosch Sicherheitssysteme GmbH
Section 5.48 Advanced Mode: Licenses, page 89
First store the firmware file on your hard drive.
Enter the full path of the firmware file in the field or click Browse to locate and select the
file.
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V5.51 | 2012.03
87