The Recordings Page - Bosch VJT-X20XF-E Installation And Operating Manual

98 en | Operation
6.6

The RECORDINGS page

The RECORDINGS page for playing back recorded video sequences can be accessed from the
LIVEPAGE and from the SETTINGS menu.
The RECORDINGS link is only visible if a storage medium has been selected.
Further topics:
–

Replay connections utilize the Adaptive Bit Rate encoding capability which automatically
adjusts the generated replay data to the available bandwidth. You may also use the built-in
transcoding function. Just select any other than the original profile to guarantee smooth
replay and browsing through recordings even for bandwidth-limited connections.
The electronic pan/tilt/zoom control allows to zoom into a region of interest. Only this cut-out
of the original recording will then be transcoded for best use of available bandwidth.
For example, if you select a replay profile defining CIF resolution for a 4CIF recording and set
the region of interest to a quarter of the full image, you get the region of interest displayed in
original and unscaled resolution.
If you pause the replay, the transcoder sharpens the image up to its original quality.
Selecting recordings
All recordings that are saved are displayed in the list. A running number (track) is assigned to
each recording. Start time and stop time, recording duration, number of alarms, and
recording type are displayed.
1.
2.
DOC | V5.51 | 2012.03
Section 5.24 Advanced Mode: Storage Management, page 50
Click the RECORDINGS link in the navigation bar in the upper section of the window. The
playback page appears.
From the Video list select the video input from which you want to view the recordings.
Select 1 or 2 from the Recording list. The contents for 1 and 2 are identical, only the
quality and location may be different.
Installation and Operating Manual
VideoJet XF E
Bosch Sicherheitssysteme GmbH