Advertisement
IPCP 505 • Setup Guide (Continued)
Control — LAN (Ethernet)
Rear Panel
Activity
LED
FLEX I/O
1 2 3 4 G
12345678
RJ-45
Connector
Insert Twisted
Pair Wires
TCP/IP
Network
About Global Configurator (GC)
What It Does
Global Configurator is the software tool for setting up an IPCP and the system it controls. Global Configurator:
Loads device drivers and uses commands from them as you desire for controlling other products
•
Creates a single configuration file containing all the settings for the IPCP and the products with which it interacts in the AV
•
system
Generates a graphical user interface called GlobalViewer that is uploaded to the IPCP (a GlobalViewer host device) along with
•
the completed configuration and can be accessed as a web page
Using GlobalViewer, users can manage, monitor, and control Extron and third-party equipment such as projectors, displays,
computer monitors, VCRs, and DVD players.
What To Set Up in GC
Use GC software to create a configuration that tells the IPCP how its ports will function; how to control other products; which
touchpanels to interact with; what to monitor; when to do things; and whom to notify, how, and under what circumstances.
Configuration
Download and install the latest versions of the following:
1.
Global Configurator software — for setting up the IPCP and creating a single system configuration file
•
Device driver package — for use with GC, to make control of other devices possible
•
GUI Configurator software — for configuring Extron TLP touchpanels
•
All are avail able from
ATTENTION:
Use Global Configurator version 3.2 or later. Update all PCs and devices running earlier versions of GC.
4
Connect to an Ethernet network with a straight-through
cable. This port must be con gured.
Default protocol:
MAC
• IPCP IP address: 192.168.254.254
Address
• Gateway IP address: 0.0.0.0
• Subnet mask: 255.255.0.0
• DHCP: off
LAN
• Link speed and duplex level: autodetected
Link
LED
Pins:
Straight-through Cable
(for connection to a switch, hub, or router)
End 1
Pin
Wire Color
1
white-orange
2
orange
3
white-green
4
blue
5
white-blue
6
green
7
white-brown
8
brown
TIA/EIA-T568B
Ethernet
Extron
TLP Touchpanel
Extron Devices
(Switchers, Scalers)
PC
www.extron.com
or on the Extron Software Products Disc.
LAN (Ethernet)
Crossover Cable
(for direct connection to a PC)
End 2
End 1
Pin
Wire Color
Pin
Wire Color
1
white-orange
1
white-orange
2
orange
2
orange
3
white-green
3
white-green
4
blue
4
blue
5
white-blue
5
white-blue
6
green
6
green
7
white-brown
7
white-brown
8
brown
8
brown
T568B
T568B
Front Panel
100
LINK
IR
ACT
End 2
Pin
Wire Color
1
white-green
2
green
3
white-orange
4
blue
5
white-blue
6
orange
7
white-brown
8
brown
T568A
100 Mbps
Connection
Network is
active.
Data is being
sent/received.
Advertisement
