Controlling The Projector - Barco Trace+ R9040341 Owner's Manual

• Whenever the IR Sensor on the projector receives an IR signal the Red IR–Received Led will light up.
Image 5-8
IR-Received Led
• In case there is IR communication between the RCU and the projector the Green IR–Acknowledged Led will light up.
Image 5-9
IR-Acknowledged Led

5.5 Controlling the Projector

Overview
• Common Address
• Projector Address
• RCU Address
• Input Selection
• Picture Controls
• Menus on Local LCD Display
R5976781 TRACE+ 14/09/2004
5. Getting Started
35