Table of Contents
Advertisement
8. Service Mode
8.8.3
Linked CLO
Linked CLO will be grayed out when Constant Light Output is set to Off.
How to change the Linked CLO setting?
1. Push the cursor key ↑ or ↓ to highlight Linked CLO. (menu 8-16)
2. Press ENTER to toggle between the different Linked CLO settings.
Following CLO Settings are available:
[MASTER]
[SLAVE]
[OFF]
Table 8-2
CLO Settings
LAMP
CONSTANT LIGHT OUTPUT [ON]
LINKED CLO [SLAVE]
MODE [ECONOMIC]
TARGET CLO LUMENS: 10000
_________________________________
Serial number :
003706
Article number :
R9840744
Run time :
140 hours
Remaining run time :
hours
Number of strikes :
Z-axis :
100 units
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return
Menu 8-16
8.8.4
Lamp Mode
Lamp Mode Setting
This menu item is grayed out since the lamp in the Trace+ is always running in economic mode.
8.8.5
Target CLO Lumens
How to change the Target CLO Lumens Setting?
1. Push the cursor key ↑ or ↓ to highlight Target CLO Lumens. (menu 8-17)
2. Press ENTER to activate the digits.
3. Use the numeric keys and/or cursor keys to set Target CLO Lumens to the desired value.
This is the default Target CLO Lumens value for the Trace+.
Galaxy SXGA+ Projector
Trace+
4. Press ENTER to confirm.
LAMP
CONSTANT LIGHT OUTPUT [ON]
LINKED CLO [SLAVE]
MODE [ECONOMIC]
TARGET CLO LUMENS: 10000
_________________________________
Serial number :
003706
Article number :
R9840744
Run time :
140 hours
Remaining run time :
hours
Number of strikes :
Z-axis :
100 units
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return
Menu 8-17
130
Master projector to control the CLO in a chain of projectors
Follows the master projector to adjust the CLO
To use the CLO functionality in case of a single, stand alone projector setup
860
160
Productnumber
R9040341
860
160
Default Target CLO Lumens value
3200 lumens
R5976781 TRACE+ 14/09/2004
Advertisement
Table of Contents
