Quick Osd Color Change - Barco Trace+ R9040341 Owner's Manual

How to Focus the Lens?
1. Loosen the 2 bolts connecting the Top Rear Cover to the Barco Trace. (image 5-5)
2. Remove the Top Rear Cover.
3. Adjust the Focus of the lens by turning the Focus Ring on the Lens. (image 5-6)
4. Reverse this procedure to mount the Cover back to the Barco Trace.
Image 5-5
Loosen the 2 bolts connecting the Top Rear Cover to the Barco
Trace

5.3.5.2 Quick OSD Color Change

What can be done?
Quick change of the color of the highlighted items.
The highlighted items can be displayed in:
• Red
• Green
• Yellow
How to change the On Screen Color
1. Press ADJUST or ENTER key to start up the Adjustment Mode.
2. Push the cursor key ↑ or ↓ to highlight Installation. (menu 5-3)
3. Press ENTER to select.
The OSD menu will be displayed. (menu 5-4)
4. Push the cursor key ↑ or ↓ to highlight the desired color.
5. Press ENTER to activate the selected color.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION [CENTER]
800-PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-3
R5976781 TRACE+ 14/09/2004
Image 5-6
Adjust the Focus of the lens by turning the Focus Ring
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
Select with ↑ or ↓
<ENTER> to accept
<EXIT> to return
Menu 5-4
5. Getting Started
33