Starting Up Installation; Input Slots - Barco Trace+ R9040341 Owner's Manual

7. Installation Mode

7.2 Starting Up Installation

How to Start Up Installation?
1. Press ADJUST or ENTER key to start up the Adjustment Mode.
The Adjustment Mode menu will be displayed.
2. Push the cursor key ↑ or ↓ to highlight Installation. (menu 7-1)
3. Press ENTER to select.
The Installation menu will be displayed. (menu 7-2)
ADJUSTMENT MODE
Select a path from
below
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with ↑ or ↓
then <ENTER>
Menu 7-1
Overview of the different settings of the Installation menu
• Input slots: to set up the input priority
• No signal: selection of a black or blue background color
• Lens: to adjust the zoom/focus and the horizontal/vertical shift of the lens
• Menu Position: to position the menu (picture settings: contrast, ...) in the center or at the edge of the screen
• 800 Peripheral: to select the type of output module and communication code used in the RCVDS 05
• Configuration: to set the projector configuration settings
• OSD color: to change the color of the highlighted item
• Internal Patterns: selection of different patterns

7.3 Input Slots

What can be done?
The input configuration of the variable inputs is shown in the Input slots menu.
How to change the Input Slots Settings?
1. Push the cursor key ↑ or ↓ to highlight Input Slots. (menu 7-3)
2. Press ENTER to select.
The Input Slots menu will be displayed. (menu 7-4)
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION [CENTER]
800-PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-3
The indication in front of the digit means:
X : Valid Signal connected to the input.
- : No Valid Signal connected to the input.
114
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION [CENTER]
800-PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-2
INPUT SLOTS
SLOT SELECTION [AUTOMATIC]
X SLOT 1 : RGB - SOG
- SLOT 2 : DVI
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return
Menu 7-4
R5976781 TRACE+ 14/09/2004