Table of Contents
Advertisement
How to change the Filter List Setting?
1. Push the cursor key ↑ or ↓ to to highlight filter list.
2. Press ENTER to toggle the annotation between brackets.
[ALL]
all files that can be loaded will be displayed
[FIT]
only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration of ± 300 ns, if nothing
is found within this small area, the projector continues searching until it finds something).
How to Load a File?
1. Push the cursor key ↑ or ↓ to select the best fitting file. (menu 6-7)
2. Press ENTER to select.
A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on. (menu 6-8)
3. Press ENTER to confirm the new creation or EXIT to return to the load file menu.
LOAD FILE
FILTER LIST [All]
Filename
Scr
resolution
xga_60.s01
1
1024x768
xga_60.c01
1
1024x760
xga_60.c02
1
1024x760
xga_60.c03
1
1024x760
----------------------------
Active file : xga_60.c04
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 6-7
During a load file, the actual file is displayed next to the indication Active file.
When scrolling through the files, the image will be adapted according to the settings of the selected file ( on
line adaptation ) .
The image is not perfect?
If the displayed image is not correct after selecting the best fitting file, go to the Edit WARP1 menu, select the active file and change
the File Settings.
6.3.5
Edit WARP1
What can be done?
•
When a Mono Image is projected, within this menu, it is possible to change the File Settings of a selected source file.
•
When a Stereo Image is projected, within this menu, it is possible to change the File Settings for the Left Image of a selected
source file.
R5976781 TRACE+ 14/09/2004
CONFIRM
LOAD FILE
create file
xga_60.c02
based on file
xga_60.s01?
<ENTER> to return
<EXIT> to return
Menu 6-8
6. Random Access
43
Advertisement
Table of Contents
