Barco Trace+ R9040341 Owner's Manual page 143

How to Start Up DynaColor™?
1. Push the cursor key ↑ or ↓ to highlight Diagnosis. (menu 8-40)
2. Press ENTER to select.
The DynaColor menu will be displayed. (menu 8-41)
SERVICE
BARCO LOGO
PRESET INPUT BALANCE 1
PRESET INPUT BALANCE 2
ELECTRONIC CONVERGENCE
DIAGNOSIS
DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-40
How to Execute the Linked DynaColor™ command?
1. Push the cursor key ↑ or ↓ to highlight Exec. Linked DynaColor™. (menu 8-42)
2. Press ENTER to execute.
This will execute the Linked Dynacolor™ command, all projectors in the linked setup will be set to their Common Color Gamut.
DYNACOLOR
COLOR COORDINATES
EXEC. LINKED DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-42
R5976781 TRACE+ 14/09/2004
DYNACOLOR
COLOR COORDINATES
EXEC. LINKED DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-41
8. Service Mode
139