Table of Contents
Advertisement
4. Trace+ Connections
Image 4-8
Communication Port
What is possible when connecting Barco's RCVDS05?
•
Up to 20 inputs with Barco's RCVDS 05 switcher (R9827880) and 90 inputs when RCVDS's are linked via the expansion module.
•
Serial communication with the projector.
•
Remote control buttons on the RCVDS to control the projector (source selection and analog settings).
•
The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED
on the rear.
For more information about the use of the RCVDS05 switcher (R9827880), consult the owner's manual of the RCVDS05.
Connecting an IR Remote Receiver to the projector
This infrared receiver unit makes it possible to control the projector from another room. There is a communication line cable between
the IR receiver and the projector or the RCVDS. The control information from the RCU can now be sent to the IR Remote Receiver.
The IR Remote Receiver displays the selected source on a 7-segment display.
4.7 Stereo Connection
How to Connect the Stereo Sync Signal?
The Stereo Sync Signal coming from the IG is connected to the Stereo In Mini DIN input on the Patch-Panel of the Trace+.
26
RCVDS 05 switcher
(R9827880)
R5976781 TRACE+ 14/09/2004
Advertisement
Table of Contents
