Barco Trace+ R9040341 Owner's Manual page 115

DLP Mirrors
Active
Blanking Time
Left Shutter
S
Open
t
e
r
Closed
e
o
G
Right Shutter
l
Open
a
s
s
Closed
e
s
Image 6-60
Shutters closing too early and/or opening too late cause Color Artifacts
Adjusting the Dark Time will allow an easy synchronization of the Blanking Period of the DLP mirrors with the opening/closing time
of the shutters in the Stereo Glasses.
How to Adjust Dark Time?
1. Push the cursor key ↑ or ↓ to highlight Dark Time. (menu 6-145)
2. Press ENTER to select.
The Dark Time bar scale, displaying the width in % (Range from 0 to 100 %), will be displayed. (image 6-61)
3. Change the Dark Time Value by pushing the cursor key ← or → until the desired value is reached.
Note: By default Dark Time is set to maximum (100%).
4. Press EXIT to return to the Stereo Options menu.
STEREO OPTIONS
STEREO PHASE
INVERT STEREO [YES]
MASTER CHANNEL [LEFT]
STEREO MODE [ACTIVE]
DARK TIME
FORCED ASYNCHRONOUS [NO]
WARNING
All projectors in the chain
must have the same setting
for Asynchronous Mode !
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-145
STEREO DARK TIME
Image 6-61
The Dark Time bar scale
R5976781 TRACE+ 14/09/2004
Opening Too Late and/or Closing Too Early
= Color Artifacts
100
6. Random Access
t
111