Barco Logo; Starting Up Barco Logo; Barco Logo Status - Barco Trace+ R9040341 Owner's Manual

8.9 Barco Logo

8.9.1

Starting Up Barco Logo

What can be done?
The Barco Logo can be added to the projected image, in overlay or on a background, on any place on the screen.
How to Start Up the Barco Logo?
1. Push the cursor key ↑ or ↓ to highlight More. (menu 8-18)
2. Press ENTER to select.
The other items in the Service menu will be displayed.
3. Push the cursor key ↑ or ↓ to highlight Barco Logo. (menu 8-19)
4. Press ENTER to select.
The Barco Logo menu will be displayed. (menu 8-20)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
LAMP
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-18
8.9.2

Barco Logo Status

How the Change the Barco Logo Status Setting?
1. Push the cursor key ↑ or ↓ to highlight Status. (menu 8-21)
2. Press ENTER to toggle Status [ON] or [OFF].
[ON] Barco Logo will be displayed on the screen
[OFF] Barco Logo will NOT be displayed on the screen
BARCO LOGO
STATUS [OFF]
BACKGROUND [OFF]
SHIFT
HOT KEY [OFF]
Select with ↑ or ↓
<ENTER> to toggle/select
<EXIT> to return
Menu 8-21
R5976781 TRACE+ 14/09/2004
SERVICE
BARCO LOGO
PRESET INPUT BALANCE 1
PRESET INPUT BALANCE 2
ELECTRONIC CONVERGENCE
DIAGNOSIS
DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-19
BARCO LOGO
STATUS [OFF]
BACKGROUND [OFF]
SHIFT
HOT KEY [OFF]
Select with ↑ or ↓
<ENTER> to toggle/select
<EXIT> to return
Menu 8-20
8. Service Mode
131