Barco Trace+ R9040341 Owner's Manual page 28

4. Trace+ Connections
How to select the Source Connection?
1. Key in 1 on the RCU.
How to change the Source Connection (Input 1) setting?
1. Press ADJUST or ENTER key to start up the Adjustment mode.
2. Push the cursor key ↑ or ↓ to select Installation. (menu 4-1)
3. Press ENTER.
4. Press the cursor key ↑ or ↓ to select Input Slots. (menu 4-2)
5. Press ENTER.
The internal system will scan the inputs and displays the result in the Input Slots menu. (menu 4-3)
6. Push the cursor key ↑ or ↓ to select the first or second slot.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 4-1
24
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION [CENTER]
800-PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 4-2
INPUT SLOTS
SLOT SELECTION [AUTOMATIC]
X SLOT 1 : RGB - SOG
- SLOT 2 : DVI
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return
Menu 4-3
R5976781 TRACE+ 14/09/2004