Table of Contents
Advertisement
How to display the SMPS Diagnosis screen?
1. Push the cursor key ↑ or ↓ to highlight SMPS. (menu 8-38)
2. Press ENTER to select.
The SMPS Diagnosis screen will be displayed. (menu 8-39)
3. Press EXIT to return to the Service Mode menu.
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-38
8.14 DynaColor™
This menu item is only usefully when working with a multichannel setup.
To connect the projectors follow the same guidelines as discribed in Constant Light Output.
In a Linked CLO and/or Dynacolor™ setup a maximum of 14 projectors can be linked, all projectors must have
a different projector address between 0 and 13 and all projectors must have the same baudrate.
What can be done?
DynaColor™ will eliminate channel-to-channel color variations.
How to define color?
The CIE chromaticity diagram is one way to plot the colors the human eye can see.
Image 8-1
A projector can only reproduce a certain color gamut within this diagram. This color gamut is defined by the triangle formed by the
x, y coordinates of Red Green and Blue. These parameters are used by the DynaColor™ adjustment in the Trace+.
R5976781 TRACE+ 14/09/2004
SMPS
I2C (30H)
OK
AMBIENT TEMPERA
OK
NTC
OK
TILT SWITCH
OK
MICRO SWITCH
OK
LAMP TEMPERATUR
OK
LPS MAINS
OK
SMPS OUTPUT
OK
<EXIT> to return
Menu 8-39
8. Service Mode
137
Advertisement
Table of Contents
