Basic Soft Edge Width Set Up - Barco Trace+ R9040341 Owner's Manual

Image 6-50
Soft Edge Width selections

6.5.7.9.10 Basic Soft Edge Width Set up

Setting up the Width for Projector 1 ?
1. Press ENTER until Right is selected. (image 6-51)
2. Push the cursor key ← or → to adjust the right width until it matches or exceeds the width of the overlap zone. (image 6-52)
3. Press EXIT to return to the Blanking/Soft Edge menu.
4. Press EXIT to return to the Guided Geometry Map menu.
5. Press EXIT to return to the Edit menu.
SOFT EDGE WIDTH RIGHT
Image 6-51
R5976781 TRACE+ 14/09/2004
0.0
6. Random Access
99