6. Random Access
6.5.7.2 Start up
How to Start up the Edit mode ?
1. Push the cursor key ↑ or ↓ to highlight Edit in the Geometry Files menu. (menu 6-53)
2. Press ENTER to select.
The Guided Geometry Map menu will be displayed. (menu 6-54)
GEOMETRY FILES
LOAD
EDIT
RENAME
COPY
DELETE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-53
6.5.7.3 Coarse
Overview
•
Start up
•
Corner selection
•
Corner adjustment
•
Side Bow selection
•
Bow shaped pre-distortion set up
•
Coarse linearity adjustment using Side Bows
•
Center selection
•
Center adjustment
6.5.7.3.1 Start up
How to Start up the Coarse adjustment ?
1. Push the cursor key ↑ or ↓ to highlight Coarse in the Guided Geometry Map menu. (menu 6-55)
2. Press ENTER to select.
The Geometry Distortion menu will be displayed. (menu 6-56)
GUIDED GEOMETRY MAP
COARSE
LINEARITY
FINE
SHIFT
TRANSPORT DELAY
BLANKING/SOFT EDGE
RESET
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-55
6.5.7.3.2 Corner selection
What can be done ?
With the Coarse Corner selection it is possible to adjust the basic geometry and size of the projected image.
66
GUIDED GEOMETRY MAP
COARSE
LINEARITY
FINE
SHIFT
TRANSPORT DELAY
BLANKING/SOFT EDGE
RESET
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-54
GEOMETRY DISTORTION
corner left top
col = 0
row = 0
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 6-56
R5976781 TRACE+ 14/09/2004