Input Balance 2 - Barco Trace+ R9040341 Owner's Manual

Image 6-5
Full white image on the source
Image 6-6
Perfect White Balance
How to return to the Default Factory Preset?
1. Push the cursor key ↑ or ↓ to highlight Default and press ENTER to select. (menu 6-36)
The input balance is set to the default factory preset.
INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Adjust
red with ↑ or ↓
blue with ← or →
Menu 6-36
6.4.4

Input Balance 2

What can be done?
When a Stereo Image is projected, within this menu, it is possible to adjust the Input Balance of the Right Image.
Follow the same steps as described above in 'Steps to be taken' see "Input Balance 1", page 52.
R5976781 TRACE+ 14/09/2004
6. Random Access
55