File Load
1. Push the cursor key ↑ or ↓ to highlight File Load. (menu 6-28)
2. Press ENTER to toggle between [AUTOMATIC] or [MANUAL].
This File Load setting is default set to [AUTOMATIC].
[AUTOMATIC]
[MANUAL]
FILE OPTIONS
FILE SORT [NAME]
FILE LOAD [AUTOMATIC]
SERIAL FILE LOAD [OFF]
Select with ↑ or ↓
<ENTER> to accept
<EXIT> to return
Menu 6-28
Serial File Load
1. Push the cursor key ↑ or ↓ to highlight Serial File Load. (menu 6-29)
2. Press ENTER to toggle between [OFF] or [ON].
This Serial File Load setting is default set to [OFF].
[OFF]
The Serial File Load command is set to off.
[ON]
The projector is forced to load a file through RS232, all other means to load a file are disabled until Serial File
Load is set to off.
FILE OPTIONS
FILE SORT [NAME]
FILE LOAD [AUTOMATIC]
SERIAL FILE LOAD [OFF]
Select with ↑ or ↓
<ENTER> to accept
<EXIT> to return
Menu 6-29
6.4 Picture Tuning
Overview
•
Starting Up Picture Tuning
•
Gamma
•
Input Balance 1
•
Input Balance 2
•
Windowing
R5976781 TRACE+ 14/09/2004
The projector will automatically load the file that is best suited for the selected Input Slot.
The user will select and load the desired file.
6. Random Access
51