5. Getting Started
5.3.3
Switching Off
How to Switch Off the Projector?
1. Frist switch the Projector to Standby.
2. Let cool down the projector until the fans stop blowing, at least 15 min.
3. Switch off the projector with the power switch.
5.3.4
Temperature Error DMD
Overview
When the temperature of one of the DMD is too low or too high the projector will be switched automatically to standby. Before switch-
ing to standby, the following message appears for 3 seconds on the screen: 'DMD out of operating temperature range. Automatic
shutdown is activated.'.
A '-t' appears on the LED display to indicate the user that the projector is switched to standby due to DMD temperature problems.
Operating temperature range of the DMD : +10°C and +35°C.
ERROR
DMD out of operating
temperature
range
Automatic shutdown is
activated
Menu 5-2
5.3.5
Quick Set Up Adjustments
Overview
•
Quick Lens Adjustment
•
Quick OSD Color Change
5.3.5.1 Quick Lens Adjustment
Necessary tools
Nut spinner M8
When no external Lens Adjustment Pattern is available from the source, press the shortcut * key on the RCU
to display the internal Lens Adjustment Pattern.
LENS ADJUSTMENT ZOOM/FOCUS
ZOOM with
FOCUS with
<ENTER> to shift
<EXIT> to return
Image 5-4
The internal Lens Adjustment Pattern
What can be done?
This will adjust the focus of the lens.
32
or
,
or
R5976781 TRACE+ 14/09/2004