Table of Contents
Advertisement
How to Select Master Channel?
1. Push the cursor key ↑ or ↓ to highlight Master Channel. (menu 6-143)
2. Press ENTER to toggle between [LEFT] or [RIGHT].
3. Press EXIT to return to the Stereo Options menu.
STEREO OPTIONS
STEREO PHASE
INVERT STEREO [YES]
MASTER CHANNEL [LEFT]
STEREO MODE [ACTIVE]
DARK TIME
FORCED ASYNCHRONOUS [NO]
WARNING
All projectors in the chain
must have the same setting
for Asynchronous Mode !
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-143
6.6.5
Stereo Mode
What can be done?
Stereo Mode is default set to Active, a Stereo Image is projected when provided by the IG.
However it is possible to display only the left or right image of the Stereo Image Pair, this is done by setting the Stereo Mode to
Passive.
Either the left or right image is projected, according to the Master Channel Selection.
How to Set Up Stereo Mode?
1. Push the cursor key ↑ or ↓ to highlight Master Channel. (menu 6-144)
2. Press ENTER to toggle between [ACTIVE] or [PASSIVE].
ACTIVE
PASSIVE
3. Press EXIT to return to the Stereo Options menu.
STEREO OPTIONS
STEREO PHASE
INVERT STEREO [YES]
MASTER CHANNEL [LEFT]
STEREO MODE [ACTIVE]
DARK TIME
FORCED ASYNCHRONOUS [NO]
WARNING
All projectors in the chain
must have the same setting
for Asynchronous Mode !
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-144
6.6.6
Dark Time
What can be done?
The principle of a pair of Stereo Glasses is quite simple:
1.
When the left image is projected, the left shutter is open, allowing the left eye to see the left image. The shutter for the right
eye is closed.
2.
During the blanking period, before projecting the right image, the left shutter is closed and the right shutter will open.
3.
The right image is projected, the right shutter is open, allowing the right eye to see the right image.
The ideal situation is when the opening/closing times of these shutters are in sync with the blanking time of DLP mirrors.
R5976781 TRACE+ 14/09/2004
The Projector will run in the default Stereo Mode, a stereo image is projected.
The Projector will only display the left or right image of the Stereo Image, according to the Master Channel
Selection, either de left or right image is projected.
6. Random Access
109
Advertisement
Table of Contents
