Diagnosis; Starting Up Diagnosis; C Diagnosis - Barco Trace+ R9040341 Owner's Manual

5. Press EXIT to return to the Convergence menu.
6. Press EXIT to return to Service menu.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE 1
PRESET INPUT BALANCE 2
ELECTRONIC CONVERGENCE

DIAGNOSIS

DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-30
8.13 Diagnosis
Overview
•

Starting Up Diagnosis

• I 2

C Diagnosis

• Formatter Diagnosis
• SMPS Diagnosis
8.13.1 Starting Up Diagnosis
What can be done?
Following items can be checked using the Diagnosis menu:
• I C Bus
2
• Formatter Board
• Switch Mode Power Supply (SMPS) Board
How to Start Up Diagnosis?
1. Push the cursor key ↑ or ↓ to highlight Diagnosis. (menu 8-32)
2. Press ENTER to select.
The Diagnosis menu will be displayed. (menu 8-33)
SERVICE
BARCO LOGO
PRESET INPUT BALANCE 1
PRESET INPUT BALANCE 2
ELECTRONIC CONVERGENCE
DIAGNOSIS
DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-32
8.13.2 I 2 C Diagnosis
What can be done?
This info screen will give an overview of the Data, Command and Address status of the I²C controlled IC's (Green box = OK, Red
Box = Error, the Box in the printed menu is shown as #).
R5976781 TRACE+ 14/09/2004
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
BLUE ON GREEN
HATCH
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-31
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-33
8. Service Mode
135