Blanking Active On; Blanking Shape Start Up; Blanking Shape Selections - Barco Trace+ R9040341 Owner's Manual

6. Random Access

6.5.7.8.2 Blanking Active On

How to switch Blanking Active On ?
1. Push the cursor key ↑ or ↓ to highlight Active in the Blanking/Soft Edge menu. (menu 6-101)
2. Press ENTER to switch Active [OFF] to [ON].
See menu 6-102.
In the default setting Active is set to [OFF].
[OFF] Blanking is disabled.
[ON] Blanking is enabled.
BLANKING/SOFT EDGE
ACTIVE [OFF]
BLANKING
SOFT EDGE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-101

6.5.7.8.3 Blanking Shape Start up

How to Start Up the Blanking Shape menu ?
1. Push the cursor key ↑ or ↓ to highlight Blanking in the Blanking/Soft Edge menu. (menu 6-103)
2. Press ENTER to select.
The Shape menu will be displayed. (menu 6-104)
BLANKING/SOFT EDGE
ACTIVE [ON]
BLANKING
SOFT EDGE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-103

6.5.7.8.4 Blanking Shape selections

How to use the Blanking Shape selection ?
1. Push the cursor key ↑ or ↓ to highlight the first item in the Shape menu. (menu 6-105)
2. Press ENTER to scroll through the available coarse shape selections: top, bottom, left and right. (image 6-42)
3. Push the cursor key ← or → to scroll through the available fine shape selections.image 6-42
SHAPE
top left
% of image = 0
%% of image = 0
Menu 6-105
90
BLANKING/SOFT EDGE
ACTIVE [ON]
BLANKING
SOFT EDGE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-102
SHAPE
top left
% of image = 0
%% of image = 0
Menu 6-104
R5976781 TRACE+ 14/09/2004