Table of Contents
Advertisement
6. Random Access
6.5.7.9.8 Soft Edge Width Start up
When Soft Edge is not installed on the projector or when the Soft Edge Active mode is set to [OFF] this menu
item will be grayed out.
What can be done with the Soft Edge Width menu ?
Within this menu the width of the blending zone is set up.
How to Start up the Soft Edge Width menu ?
1. Push the cursor key ↑ or ↓ to highlight Soft Edge. (menu 6-116)
2. Press ENTER to select.
The Soft Edge Width barscale, displaying the width in % (Range from 00.0 to 25.5 %), will be displayed. (image 6-49)
BLANKING/SOFT EDGE
ACTIVE [ON]
BLANKING
SOFT EDGE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-116
SOFT EDGE WIDTH TOP
Image 6-49
The Soft Edge Width barscale
6.5.7.9.9 Soft Edge Width selections
How to use the Soft Edge Width selection ?
1. Press ENTER to scroll through all available Soft Edge Width selections: top, bottom, left and right. (image 6-50)
98
0.0
R5976781 TRACE+ 14/09/2004
Advertisement
Table of Contents
