Load - Barco Trace+ R9040341 Owner's Manual

6.5.6

Load

How to start up ?
To start up the Load File menu, handle as follow :
1. Push the cursor key ↑ or ↓ to highlight Load. (menu 6-50)
2. Press ENTER to select.
The Load File menu will be displayed. (menu 6-51)
GEOMETRY FILES
LOAD
EDIT
RENAME
COPY
DELETE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-50
How to change the Preview setting ?
1. Push the cursor key → to highlight Preview.
2. Press ENTER to toggle the Preview mode [OFF] [ON].
OFF When highlighting a geometry file from the list, the geometry adjustments will be applied only when selecting a
file by pressing the ENTER key.
ON The geometry adjustments are already applied when highlighting a file from the list, this will require some
processing time from the projector when scrolling through the list of available files.
How to Load a file ?
1. When starting a new set up ?
If yes, Push the ↓ key to highlight the "t_nodist.t01" filestep 2 (menu 6-52)
If no, When editing an existing set up push the ↑ or ↓ to highlight the corresponding user file .
2. Press ENTER to select.
The selected geometry file will become the active file and the Geometry files menu will be displayed again.
LOAD FILE
PREVIEW[OFF]
Filename
geometry.g01
t_bowing.t06
t_bowlin.t02
t_keyst.t03
t_nodist.t01
-------------------------------
Active file : geometry.g01
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 6-52
R5976781 TRACE+ 14/09/2004
LOAD FILE
PREVIEW[OFF]
Filename
geometry.g01
t_bowing.t06
t_bowlin.t02
t_keyst.t03
t_nodist.t01
-------------------------------
Active file : geometry.g01
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 6-51
6. Random Access
63