Frequency Jump Function; Pid Function - Omron SYSDRIVE MX SERIES User Manual

Frequency Jump Function

This function helps avoid resonant points of loaded machines.
Parameter No. Function name
A063 Jump frequency 1
A065 Jump frequency 2
A067 Jump frequency 3
A064 Jump frequency width 1
A066 Jump frequency width 2
A068 Jump frequency width 3
Related functions
•The output frequency cannot be set within the frequency range set in the frequency jump function.
•The output frequency fluctuates continuously according to the acceleration/deceleration time
during both actions. The jump frequency can be set at up to three points.

PID Function

This function enables process control of such elements as flow rate, air volume, and pressure.
Parameter No. Function name
A071 PID selection
A072 PID P gain
A073 PID I gain
A074 PID D gain
A075 PID scale
A076 PID feedback selection
A077 Reverse PID function
PID output limit
A078
function
0.0 to 400.0
0.0 to 10.0
Output
frequency
A067
A065
A064
A063
A064
00: Disabled
01: Enabled
0.2 to 5.0
0.0 to 150.0
0.00 to 100.0
0.01 to 99.99
00: FI
01: FV
02: RS485 communication
10: Operation function output
00: Deviation = Target value -
Feedback value
01: Deviation = Feedback value -
Target value
0.00 to 100.0
Data Default setting
C001 to C006
A068
A068
A066
A066
Frequency
reference
Data Default setting
4-2 Function Mode
Unit
0.0
Hz
0.5
Unit

00

1.0
1.0 s
0.0 s
1.00 Time

00

00
0.0 %
4-18
4