Omron SYSDRIVE MX SERIES User Manual page 144

4-2 Function Mode
Multi-function Output Selection
Parameter No.
C021
C022
4
C026
•You can allocate the following functions to multi-function output terminals P1, P2 and the relay
output terminals.
•Multi-function output terminals P1 to P2 provide open-collector output. The relay output terminal
provides SPDT contact relay output.
•You can select NO- or NC-contact output for each output terminal with C031 to C032 or C036.
Data
Signal During RUN
This function outputs a signal while the Inverter is running.
Data
00
Available input terminals
Required settings
4-53
Function name
00: RUN (signal during RUN)
Multi-function output
01: FA1 (constant speed arrival signal)
terminal P1 selection
02: FA2 (over set frequency arrival
03: OL (overload warning)
Multi-function output
04: OD (excessive PID deviation)
terminal P2 selection
05: AL (alarm output)
06: Dc (disconnection detected)
07: FBV (PID FB status output)
08: NDc (network error)
Relay output (MA, MB)
09: LOG (logic operation output)
function selection
10: ODc (communication option
Description
00 RUN: Signal during RUN
01 FA1: Constant speed arrival signal
02 FA2: Over set frequency arrival signal
03 OL: Overload warning
04 OD: Excessive PID deviation
05 AL: Alarm output
06 DC: Disconnection detection
07 FBV: PID FB status output
08 NDC: Network error
09 LOG: Logic operation output
10 ODc: Communication option disconnected
Symbol Function name
RUN Signal during RUN
Data
signal)
disconnected)
Signal during RUN
Frequency arrival signal
Overload limit/Overload
External analog input
disconnection detection
Logic operation function
Network signal error
Status
ON The Inverter is in RUN mode.
OFF The Inverter is in STOP mode.
P1-PC, P2-PC, MA-MC (or MB-MC)
C021, C022, C026
Default setting
00
01
05
Reference item Page
warning
PID function

PID function
Network error
Description
Unit



4-53
4-54
4-55
4-56
4-56
4-57
4-58
4-58
4-59
4-59