Removing And Mounting Each Part - Omron SYSDRIVE MX SERIES User Manual

2-2 Removing and Mounting Each Part

2-2 Removing and Mounting Each Part
2
Removing and Mounting the Terminal Block Cover
3G3MX-A2002 to A2037, 3G3MX-A4004 to A4037, 3G3MX-AE002 to AE022
(1) Removing the Terminal Block Cover
Press the one side (1) of tab A on the terminal block cover, and use the opposite side of tab A as a
supporting point to disconnect tab B on the same side of the pressed tab A.
Then, press the opposite side of tab A and disconnect the other tab B.
2-5
(1)
Tab B
Connection to the
terminal block cover
Supporting point
Tab A