Keys - Omron SYSDRIVE MX SERIES User Manual

3-5 Keys

Name
Mode key
Increment key
Decrement key
RUN key
STOP/RESET key
Enter key
Switches between the command setting and the data setting, and between the
extended function mode and the basic function mode.
With this key, you can always change the display as follows:
[Supplemental Information]
To jump to "d001" from any function mode, hold down the Mode key for 3
seconds.
fk0k0k1
Note: Always press the Enter key to store any changed data.
Changes the set values, parameters, and commands.
Starts the operation. Forward/Reverse rotation depends on the "F004" setting.
Stops the operation. Functions as a reset key if an error occurs.
Enters and stores changed data.
Do not press the Enter key if you don't want to store any changes, for example, if
you change the data inadvertently.
Description
k5k8.1
or
5k8.0
5k7.9

3-5 Keys

3
fk0k0k1
3-16