Daily Inspection And Periodic Inspection - Omron SYSDRIVE MX SERIES User Manual

6-1 Inspection and Maintenance

Daily Inspection and Periodic Inspection

Inspection Inspection
part item
General Ambient
environment
Entire device Check that there are
Power supply
voltage
6
*1. The life of the capacitor depends on ambient temperatures. Refer to "Product Life Curve" (App-17).
*2. Clean the Inverter periodically. Accumulated dust in or on the cooling fan or heat sink can cause the Inverter
to overheat.
6-3
Inspection
period
Inspection point
Daily
Check ambient
temperature, as well
as checking for
humidity, dust,
hazardous gases, oil
mist, etc.
no abnormal vibrations
or sounds.
Check that the main
circuit voltage is
normal.
Inspection
Criteria
method
Periodic
Monitoring, Ambient
visual temperature
inspection -10°C to +40°C
With no freezing
Ambient humidity
20% to 90%
With no condensation
Visual or
acoustic
inspection
Voltage The following
measurement conditions must be
between satisfied:
terminals
R/L1, S/L2 (200-V class)
and T/L3 on 200 to 240 V
the Inverter 50/60 Hz
terminal (400-V class)
block. 380 to 480 V
50/60 Hz
Standard
replacement Meter
period
Thermometer
Hygrometer

Tester