Omron SYSDRIVE MX SERIES User Manual page 151

Multi-function Output Terminal ON Delay/OFF Delay
This function allows you to set ON/OFF delay times respectively from 0.1 to 100 seconds at the
signal output of the multi-function output terminals (P1 and relay). The following figure shows the
output status.
Parameter No. Function name
Output terminal P1
C144
ON delay
Output terminal P1
C145
OFF delay
Output terminal P2
C146
ON delay
Output terminal P2
C147
OFF delay
Relay output
C148
ON delay
Relay output
C149
OFF delay
Original signal waveform
(without delay)
ON delay only
OFF delay only
ON delay and
OFF delay
Multi-function Output Contact Selection
•You can set NO- or NC-contact output individually for multi-function output terminals P1 to P2 as
well as the relay output terminal.
•Multi-function output terminals P1 to P2 provide open-collector output. The relay output terminal
provides SPDT contact relay output.
Parameter No. Function name
Multi-function output terminals
C031 to C032
P1, P2 contact selection
Relay output (MA, MB) contact
C036
0.0 to 100.0
0.0 to 100.0
0.0 to 100.0
0.0 to 100.0
0.0 to 100.0
0.0 to 100.0
ON delay
00: NO contact
01: NC contact
00: NO contact between MA and MC
selection 01: NC contact between MA and MC
Data
OFF delay ON delay
Data
4-2 Function Mode
Default setting Unit
0.0 s
0.0 s
0.0 s
0.0 s
0.0 s
0.0 s
OFF delay
Default setting Unit

00

01
4-60
4