Parameter Transition - Omron SYSDRIVE MX SERIES User Manual

3-6 Parameter Transition

3-6 Parameter Transition

3
*1. Data is not stored by pressing the Mode key.
*2. Press the Enter key to store the data.
*3. When you press the Mode key after you return to the parameter number display without storing the data in
the extended function mode, the mode selection function is selected.
*4. When you press the Enter key with d*** or F001 displayed, the monitor value is stored as the initial display
that appears when the power is turned on.
*5. When you press the Enter key, the first digit of each parameter setting is stored as the initial display that
appears when the power is turned on.
fk0k0k2 ak-k-k-
(Example:
3-17
*4
dk0k0k1
*4
Press the key.
dk0k8k3
*4
fk0k0k1
*5
fk0k0k4
ak-k-k-
bk-k-k-
ck-k-k-
hk-k-k-
,
, etc.)
*4
0.0
ak0k0k1
*3
*5
ak0k0k1 0k0k0k0
*2
0k0k0k1 9k9k9k9
*5
*1
ak0k0k2 0k0k0k0
*2
0k0k0k1 9k9k9k9
*5
ak0k0k3
*1