Omron SYSDRIVE MX SERIES User Manual page 183

Name
Shuts off the output if the temperature has risen in the main circuit due
Temperature error
to malfunction of the cooling fan or other reasons.
Appears if a fault is detected in communication behavior between the
Gate array error
built-in CPU and the gate array.
Thermistor error
(Available when the Detects the resistance of the external thermistor and shuts off the
thermistor trip Inverter output.
function is used)
*1. After a trip occurs, normal operation is restored in 10 seconds by resetting.
*2. Check the set data again if the EEPROM error
*3. If the power is shut off during data initialization, an EEPROM error
turned on. Shut off the power after completing data initialization or copying.
*4. If an undervoltage trip
ek k0k9
trip reset. Reset again to release the trip.
*5. The ground fault trip
ek k1k4
*6. If the multi-function output (relay output) is set to 05 (alarm), the signal may not be output during the CPU
error . In this case, no error data is stored in the trip monitor.
ek k2k2
Description
occurs.
ek k0k8
occurs with the USP terminal turned ON, a USP error
cannot be released with the reset input. Shut off the power and check the wiring.
5-1 Special Display List
Display on Digital
may occur when the power is next
ek k0k8
ek k1k3
Operator
ek k2k1
ek k2k3
ek k3k5
5
occurs after a
5-2