Table 7-8 Auto Focus Operation; Table 7-9 Preset Tour Auto Focus Operation - Honeywell ACUIX User Manual

High speed dome camera
Hide thumbs Also See for ACUIX:
Table of Contents

Advertisement

On-Screen Setup Menus
100
Auto Focus
Select 6 from the Control Options menu to set up the operation of the Lens Auto Focus.
Selecting 6 toggles between the options: OFF, Z (default), and PTZ.
The minimum focus distance is set at 1.0 meter (3.3 ft) from the camera lens in both manual
and automatic focus mode.
Table 7-8
Auto Focus Operation
Value
OFF
Z
PTZ
Preset Tour Auto Focus
Select 7 to toggle the Preset Tour Auto Focus feature ON or OFF (default).
Table 7-9
Preset Tour Auto Focus Operation
If:
Preset Tour Auto Focus is on
Preset Tour Auto Focus is off
Change Address, Protocol
This menu display is determined by the
setting of DIP Switch SW5/8. If SW5/8 is set
to ON, the current address and protocol
settings can be viewed, but cannot be
changed.
If SW5/8 is set to OFF, then the address,
baud rate, and protocol can be changed.
Usage
Turns the Auto Focus feature off. The lens
must be manually focused.
The lens auto focuses whenever the zoom
setting is changed. This is the
recommended setting for normal
operation.
The lens auto focuses whenever the pan,
tilt, or zoom positions are changed.
Then:
The lens auto focuses when going to a
Preset while running a Preset Tour.
The lens goes directly to the focus position
stored for each Preset while running the
Preset Tour. It does not auto focus. This is
the recommended setting.
ADDRESS, PROTOCOL CHANGE MENU
Settings Change "DISABLED*
1 Change Camera Address .... 1
2 Change Protocol .... DIAMOND
3 Change Baud Rate ...... 9600
4 Change Parity ......... EVEN
ESC to Exit

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acuix hdcfp0000Acuix hdcgn0000Acuix hdcgp0000

Table of Contents