Auto Focus; Vectorscan Auto Focus - Honeywell UltraDome KD6i Series User Manual

5.3 CONTROL OPTIONS, CONTINUED
5.3.6

Auto Focus

Select 6 to setup the operation of the
Lens Auto Focus. Selecting 6 toggles
between the options (OFF, Z, PTZ).
The minimum focus distance is set at
1.0 meter (3.3 feet) from the camera lens
in both manual and automatic focus
mode.
Value
OFF
5.3.7

VectorScan Auto Focus

Select 7 to toggle the VectorScan Auto
Focus feature ON or OFF.
If:
VectorScan auto focus is ON
VectorScan auto focus is OFF
Rev. D
Turns the Auto Focus feature OFF. The lens must be manually
focused.
Z The lens auto focuses whenever the zoom setting is changed.
The lens auto focuses whenever the pan, tilt, or zoom positions are
PTZ
changed.
CONTROL OPTIONS
1 PASS ............................................ ON
2 Auto-Pivot...................................... ON
3 Program Alarms
4 Set Pan and Tilt Options
5 Set Default Function
6 Auto Focus ....................................... Z
7 VectorScan Auto Focus............... OFF
ESC to Exit
Usage
CONTROL OPTIONS
1 PASS ............................................ ON
2 Auto-Pivot...................................... ON
3 Program Alarms
4 Set Pan and Tilt Options
5 Set Default Function
6 Auto Focus ....................................... Z
7 VectorScan Auto Focus............... OFF
ESC to Exit
Then:
The lens auto focuses when going to a PreShot
while running a VectorScan.
The lens goes directly to the focus position
stored for each PreShot while running a
VectorScan. It does not autofocus.
31 KDMU000799
02/6/04