Upgrading The Device's Firmware - Honeywell Performance HDZP252DI User Manual

Upgrading the Device's Firmware

Before using the camera, make sure that the latest firmware is installed. You can upgrade a
single device or multiple devices at the same time.
To upgrade a single device:
1.
2.
3.
4.
Figure 2-2 Network Settings
Select the device to upgrade from the list of devices in ConfigTool.
Click Login. Enter the login user name and password for the device (the default user name
is admin and the default password is 1234), and click OK.
Click the Upgrade tab on the Config screen (see
Click OpenFile, navigate to the directory that contains the firmware file, and then click
Upgrade.
Getting Started with the ConfigTool | 15
Figure 2-3).
800-22757 - A - 02/2017