Upgrading The Camera's Firmware; Accessing The Camera From A Web Browser - Honeywell HED2PER3 Configuration Manual

Upgrading the Camera's Firmware

Before you begin using your camera, make sure you have the latest firmware installed. You
can upgrade a single camera or multiple cameras at the same time.
To upgrade a single camera:
1. Select the camera that you want to upgrade from the devices list.
2. Click the Upgrade tab.
3. Click Browse, navigate to the directory that contains the firmware file (.bin), select the file,
and then click Open. The firmware file appears in the Target File field.
4. Click Upgrade. When the upgrade is complete, the camera will reboot.
To upgrade multiple cameras at the same time:
1. In the left-most pane of the IPC Tool utility, click Batch Setting.
2. Select all the cameras that you want to upgrade from the devices list.
3. Click the Upgrade tab.
4. Click Browse, navigate to the directory that contains the firmware file (.bin), select the file,
and then click Open. The firmware file appears in the Target File field.
5. Click Upgrade. When the upgrade is complete, the cameras will reboot.

Accessing the Camera from a Web Browser

To access the camera from a web browser:
1. Select the camera that you want to access from the devices list. The camera must be
online .
2. On the Device Information tab, click Web Page. The web client opens in your default
browser.
Accessing the Camera
5