Queue Bandwidth Control Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.

Queue Bandwidth Control Settings

To view the following window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as show below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
From Queue / To Queue
Min Rate (8-10240000)
Max Rate (8-10240000)
Click the Apply button to accept the changes made.
user authentication, there may be multiple TX bandwidths assigned if there are multiple
users attached to this specific port. The final TX bandwidth will be the largest one among
these multiple TX bandwidths.
Figure 6-5 Queue Bandwidth Control Settings window
Description
Select the unit you wish to configure.
Use the drop-down menu to select the port range to use for this configuration.
Use the drop-down menu to select the queue range to use for this configuration.
Specify the packet limit, in Kbps that the ports are allowed to receive. Tick the No
limit check box to have unlimited rate of packets received by the specified queue.
Enter the maximum rate for the queue. For no limit select the No Limit option.
212