6.1 Overview
Introduction
This section describes the field calibration procedures for the following types of outputs:
• Current Output
• Auxiliary Output
What's in this section?
The following topics are covered in this section.
6.1 Overview
6.2 Current Output Calibration
6.3 Auxiliary Output Calibration
6.4 Restore Output Factory Calibration
OUTPUT CALIBRATION MAY REQUIRE ACCESS TO HAZARDOUS LIVE CIRCUITS, AND
SHOULD ONLY BE PERFORMED BY QUALIFIED SERVICE PERSONNEL. MORE THAN
ONE SWITCH MAY BE REQUIRED TO DE-ENERGIZE UNIT BEFORE CALIBRATION.
4/07
6 Output Calibration
TOPIC
WARNING—SHOCK HAZARD
UDC2500 Universal Digital Controller Product Manual
Output Calibration
See Page
151
152
154
156
151