Figure 4-16 Configuration Upload In Progress - Honeywell UDC2500 Product Manual

Monitoring and Operating the Controller

Figure 4-16 Configuration Upload in Progress

Once the upload is complete, click on the Ethernet & Email Group. Configure your
Ethernet and Email parameters per Section 3.16.
Once you have changed the Ethernet settings and downloaded them to your controller,
you will no longer be able to communicate with it until you change the IP address in the
®
P.I.E. Tool to be per the controller's new IP Address.
You will also need to re-configure the Local Area Network (LAN) settings on your PC
back to their original settings. On some PCs and LANs, it is possible to simply allow the
PC to get these settings automatically via the DHCP server. Contact your Information
Technologies (IT) representative to see if this is available on your PC.
4/07 UDC2500 Universal Digital Controller Product Manual 135