Honeywell UDC2500 Product Manual page 64

Configuration
Function Prompt
Lower Display
English Numeric
Code
L DISP 405
RESET 406
INCRMT 407
50
Selection or Range of Setting
Upper Display
English Numeric
TREM
ET
Key
AL1
MIN
SEC
UDC2500 Universal Digital Controller Product Manual
Code
L DISP allows you to select whether time
0
remaining (TI REM) or elapsed time (E
1
TIME) is displayed for the timer option.
The time is shown on the lower display in
HH:MM format along with a rotating "clock"
character.
• If the "clock" rotation is clockwise, elapsed
time is indicated.
• If the "clock" rotation is counterclockwise,
time remaining is indicated.
RESET TIMER determines how the Timer
will be set back to zero.
0 KEY – Reset Timer via Run/Hold Key
1
ALARM 1 – Reset the Timer via either Alarm
1 or Run/Hold Key
INCREMENT This selection determines how
the timer's count will increment.
0 MINUTES Counts are in Hours/Minutes
1
SEC Counts are in Minutes/Seconds
Parameter
Definition
4/07