Output Calibration; Overview - Honeywell UDC3500 Product Manual

6.1 Overview

Introduction
This section describes the field calibration procedures for the following types of outputs:
• Current Outputs
• Position Proportional Output and Three Position Step Output
What's in this section?
The following topics are covered in this section.
6.1 Overview
6.2 First Current Output Calibration
6.3 Second Current Output Calibration
6.4 Third Current Output Calibration
6.5 Position Proportional and Three Position Step Output Calibration
6.6 Restore Factory Output Calibration
OUTPUT CALIBRATION MAY REQUIRE ACCESS TO HAZARDOUS LIVE CIRCUITS, AND
SHOULD ONLY BE PERFORMED BY QUALIFIED SERVICE PERSONNEL. MORE THAN
ONE SWITCH MAY BE REQUIRED TO DE-ENERGIZE UNIT BEFORE CALIBRATION.
3/07

6 Output Calibration

TOPIC
WARNING—SHOCK HAZARD
UDC3500 Universal Digital Controller Product Manual
Output Calibration
See Page
295
296
298
300
302
305
295