Honeywell UDC2500 Product Manual page 171

Step Operation
Return to Normal
4
Operation
4/07
Press
Upper Display = the new selection
Lower Display = CRANGE (for the Current Output)
- or -
Lower Display = ARANGE (for the Auxiliary Output)
to change the range selection in the upper display back to the
or
proper selection. You will see:
Upper Display = Original range selection
Lower Display = CRANGE (for the Current Output)
- or -
Lower Display = ARANGE (for the Auxiliary Output)
to return to Normal operating mode.
Lower Lower Lower
Display Display Display
The factory calibration will be restored. If the problem is not
corrected, contact the Honeywell Technical Assistance Center at 1-
800-423-9883 USA and Canada
UDC2500 Universal Digital Controller Product Manual
Output Calibration
Result
157