Section 8 - Output Calibration; Overview - Honeywell UDC 3300 Product Manual

8.1 Overview

Introduction
What's in this section
4/00
Section 8 – Output Calibration
This section describes the field calibration procedures for the following
types of outputs:
• Current Output
• Position Proportional and 3 Position Step Output
• Auxiliary Output
This section contains the following topics:
8.1 Overview
8.2 Current Proportional Output Calibration
• Introduction
• Equipment Needed
• How to Connect the Calibrator
• Calibration Procedure
8.3 Position Proportional and Three Position Step Output
Calibration
• Position Proportional Control
• 3 Position Step Control
• Equipment Needed
• What connection to make
• Calibration Procedure
8.4 Auxiliary Output Calibration
• Introduction
• Equipment Needed
• How to Connect the Calibrator
• Calibration Procedure
WARNING—SHOCK HAZARD
OUTPUT CALIBRATION MAY REQUIRE ACCESS TO
HAZARDOUS LIVE CIRCUITS, AND SHOULD ONLY BE
PERFORMED BY QUALIFIED SERVICE PERSONNEL.
MORE THAN ONE SWITCH MAY BE REQUIRED TO DE-
ENERGIZE UNIT BEFORE CALIBRATION.
UDC 3300 Controller Product Manual
Topic See Page
233
234
234
234
234
235
236
236
236
236
236
237
240
240
240
240
241
!
233