Static Parameters Of The 2 Ai Hs I Electronic Module (4–20Ma, 2-Wire Measur Ing Transducer) - Siemens Metro 21 M216KA Operator's Manual

SC Analog Electronic Modules – T echnical Data
Parameters
Table 12-6 Static Parameters of the 2 AI HS I Electronic Module (4–20mA, 2-Wire Measuring Transducer)
Parameter
Measurement type
Measurement range (4-wire
measuring transducer)
Smoothing
Format
Defaultparameter
12-34
The 2 AI HS I high-speed electronic module (4–20mA, 2-wire measuring
transducer) uses the following parameters:
Value Range
Deactivated
Current (2-wire measuring
transducer)
4...20 mA
None
Weak
Medium
Strong
SIMATIC S7
SIMATIC S5
If you have not set the parameters of the 2 AI HS I high-speed electronic
module (4–20mA, 2-wire measuring transducer) using the specified software
(see Chapter 4), the default settings for all parameters apply to both input
channels after a restart (see Table 12-6).
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
Default Parameters
Current (2-wire measuring
transducer)
4...20 mA
None
SIMATIC S7
Scope
Channel
Channel
Channel
Channel
EWA 4NEB 780 6009-02c