Standards And Certification - Siemens Metro 21 M216KA Operator's Manual

General T echnical Data
6.1

Standards and Certification

Introduction
IEC 1131
PROFIBUS DP
CE Marking
PNO
Product Name
ET 200L 16 DI DC 24 V
ET 200L-SC 16 DI DC 24 V
ET 200L 32 DI DC 24 V
ET 200L-SC 32 DI DC 24 V
ET 200L 16 DO DC 24 V/0.5 A
ET 200L-SC 16 DO DC 24 V/0.5A
ET 200L 32 DO DC 24 V/0.5 A
ET 200L 16 DI/16 DO DC 24 V/0.5 A 6ES7 133-1BL00-0XB0
6-2
This chapter contains information the following for the modules and compo-
nents of the ET 200L and Smart Connect SC:
The most important standards complied with by the ET 200L and Smart
Connect SC
The certification of the ET 200L and Smart Connect SC
The ET 200L distributed I/O device and Smart Connect SC meet the require-
ments and criteria of IEC 1131, Part 2.
The ET 200L distributed I/O device and Smart Connect SC meet the require-
ments and criteria of EN 50 170 Volume 2, PROFIBUS.
Our products fulfill the requirements and safety objectives of the following
EC Directives and comply with the harmonized European standards (EN)
published for stored-program controllers in the official journals of the Euro-
pean Communities:
89/336/EEC Electromagnetic Compatibility Directive
73/23/EEC Low Voltage Directive (for electrical equipment)
The EC Declarations of Conformity are available to the relevant authorities
at the following address:
Siemens Aktiengesellschaft
Bereich Automatisierungstechnik
A&D AS E 14
Postfach 1963
D-92209 Amberg
The ET 200L has the following PNO certificates:
Order Number
6ES7 131-1BH00-0XB0
6ES7 131-1BH11-0XB0
6ES7 131-1BL00-0XB0
6ES7 131-1BL11-0XB0
6ES7 132-1BH00-0XB0
6ES7 132-1BH11-0XB0
6ES7 132-1BL00-0XB0
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
Release PNO Certificate
1 Z00179
1 Z00210
1 Z00180
1 Z00212
1 Z00181
1 Z00211
1 Z00182
1 Z00183
EWA 4NEB 780 6009-02c