Components Of An Et 200L-Sc Im-Sc - Siemens Metro 21 M216KA Operator's Manual

Product Overview
Expanding the
ET 200L-SC IM-SC
High-Speed
Analog Input
Modules
Components for
the ET 200L-SC
IM-SC
Table 1-4

Components of an ET 200L-SC IM-SC

Component
IM-SC interface module
TB 16IM-SC terminal block
– With spring terminal
– With screw-type terminal
TB 16SC terminal block (with
SC connection cable)
– With spring terminal
– With screw-type terminal
Digital/analog electronic mod-
ules/counter module
Smart Connect connecting cable
(comes with the TB 16IM-SC
terminal block)
1-14
The ET 200L-SC IM-SC can be expanded by means of a TB 16SC terminal
block to connect 8 additional SC electronic modules.
These modules offer high-speed measured-value acquisition and data transfer.
They are particularly well suited to rapid data acquisition for pressure and
flow measurements.
The high-speed analog input modules can only be used in the TB 16IM-SC
terminal block or in the expanded TB 16SC terminal block.
There are a range of components available for installing and commissioning
a Smart Connect. Table 1-4 lists the components and specifies their func-
tions:
Function
... connects the TB 16IM-SC
terminal block to the
PROFIBUS-DP.
...carries the wiring, the IM-SC
interface module and the SC
electronic modules.
... is added to the TB 16IM-SC
and carries the wiring and
8 additional SC electronic mod-
ules.
...are connected to the
TB 16IM-SC and TB 16SC ter-
minal blocks. Electronic mod-
ules determine the functions (in-
put/output...).
... connects the ET 200L-SC
IM-SC to the TB 16SC for con-
necting 8 additional SC electro-
nic modules.
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
Illustration
IM-SC
EWA 4NEB 780 6009-02c