Parameters Of The Analog Input Modules - Siemens Metro 21 M216KA Operator's Manual

SC Analog Electronic Modules – Parameters

11.1 Parameters of the Analog Input Modules

Tool for
Parameterization
Parameters
11-2
This section contains an overview of the parameters of the analog input mod-
ules.
The modules use a subset of the parameters and value ranges listed below,
depending on their functionality.
You will find the tools for parameterization described in Section 4.1.
In the following table, you will find all the parameters used by analog mod-
ules.
The following settings are possible for each channel:
Measurement range deactivated (yes/no)
Voltage measurement range
80 mV
1 ... 5 V
10 V
Current measurement range for 4-wire measuring transducer
0 ... 20 mA
4 ... 20 mA
20 mA
Current measurement range for 2-wire measuring transducer
4 ... 20 mA
Resistance measurement range, 4-conductor connection
600
Thermal resistance with linearization, 4-conductor connection
Pt 100 climatic range
Pt 100 standard range
Ni 100 standard range
Thermocouples with linearization
Type R
Type J
Type K
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
Parameter
EWA 4NEB 780 6009-02c