Configuration Software - Siemens Metro 21 M216KA Operator's Manual

Commissioning
4.1

Configuration Software

ET 200L
ET 200L-SC
DP Master
SIMATIC S7 STEP 7 as of Version 3.0
IM 308C COM ET 200 Windows as of Version 1.0 See Table C-14
IM 308C COM ET 200 Windows as of Version 2.1 See Table C-14
COM PROFIBUS as of Version 3.0
S5-95U with DP COM ET 200 Windows as of Version 1.0 See Table C-14
master interface
Other master COM PROFIBUS Version 3.1
ET 200L-SC IM-SC
DP Master Configuration Software
SIMATIC S7 STEP 7 as of Version V 4.1
IM 308-C COM PROFIBUSas of Ver-
sion V 3.2
S5-95U with DP COM PROFIBUS as of Ver-
master interface sion V 3.2
Other master COM PROFIBUS as of Ver-
sion V 3.2
4-2
You configure the ET 200L distributed I/O device and SC using the following
configuration software.
COM ET 200 Windows as of Version 1.0
COM PROFIBUS as of Version 3.0
STEP 7 as of Version 2.1
You will find the name of the type file for the various electronics blocks and
the contents of the device master file described in Appendix C.
The following applies to the ET 200L-SC:
Configuration Software
The following applies to the ET 200L-SC IM-SC:
See Table C-14
See Table C-14
See Table C-14
Recommendation: S. Table C-14 and
Device master files: See Table C-2
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
Type Files
See Table C-14
Device master files: See
Table C-2
See Table C-14
Recommendation: See
Table C-14 and Device
master files: See Table C-2
Type Files
EWA 4NEB 780 6009-02c
see Section
5.2.1 to 5.2.5
5.2.6
C.5
5.2.1 to 5.2.5
5.2.1 to 5.2.5
5.2.6
C.5
5.2.6
C.5
see Section
5.2.1 to 5.2.5
5.2.1 to 5.2.5
5.2.6
C.5
5.2.6
C.5