Analog Value Representation For Output Modules In S7 Number Format - Siemens Metro 21 M216KA Operator's Manual

11.23 Analog Value Representation for Output Modules in S7 Number For-
mat
How to Read the
Measurement
Tables
Voltage Range
10 V
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
EWA 4NEB 780 6009-02c
The tables in this section contain the measurement representations for the
individual measurement ranges of the analog output modules. The table val-
ues apply to all modules with the corresponding measurement ranges.
The following tables contain the digitized analog values for the various mea-
surement ranges.
Since the binary representation of the analog values is always the same, the
following tables contain only the measurement ranges against the units.
Measured System
Value in %
Dec.
118.5149 % 32767
117.593 % 32512
117.589 % 32511
27649
100 % 27648
0.003617 % 1
0 % 0
– 0.003617 % – 1
– 100 % – 27648 9400
– 27649 93FF
117.593 % – 32512 8100
–117.596% – 32513 80FF
– 118.519 % – 32768 8000
SC Analog Electronic Modules – Parameters
Voltage Range
Hex. 10 V
7FFF 0.00 V Overflow, no voltage and no
current current
7F00 0.00 V
7EFF 11.76 V Overrange
6C01
6C00 10 V Rated range
1 361.7 V
0 0 V
FFFF – 361.7 V
– 10 V
Underrange
– 11.76 V
0.00 V Underflow, no voltage and no
current current
0.00 V
g
g
11-39